Reverse the Tiptronic shift pattern possible?

Posted by: Andy-UK on 2002-01-07 at 17:29:58
(posted from: Host: inktomi3-bre.server.ntl.com IP: 62.253.64.6)
Message:
There is a conencter below the shifter:
pin 4 - white green (manual)
pin 3 - blue gray ( upshift)
pin 2 - blue green (downshift)
pin 1 - brown black (ground)
Reverse the green and grey wires.
I'd like to reverse the step pattern on my MY97 posted by Andy-UK on October 21, 2001 at 06:39:30:

(posted from: london-ppp51953.sympatico.ca (209.226.247.34))
Wonder if it could be done. After all I guess it is just a couple of switches.
That is an interresting idea.
From the info I have it is just 2 wire leads (one from each directional
switch)
If you can find a connector with 4 wires in it at the shifter.
pin 4 - white green (manual)
pin 3 - blue gray ( upshift)
pin 2 - blue green (downshift)
pin 1 - brown black (ground)
Then you "probably" just have to interchange the two blue/ leads (note it is the 2 blue leads but I am not sure of the other colour in those leads)
Cheers
Jim Cash